For this course, you will need one computer to run Windows Server 2011 Enterprise Edition and Exchange Server 2011. This system should have the following configuration:
-
Insert the Windows Server 2008 DVD.
-
On the press any key to continue screen, press any key.
-
In the Install Windows wizard, on the Windows Server 2008 screen, click
Next.
-
In the Install Windows wizard click Install now
-
On the Select the operating system you want to install page, scroll down and select
Windows Server 2008 Enterprise (Full Installation) edition (full installation) with 64-bit architecture and click
Next.
-
On the Please read the license terms page, check the I accept the license terms check box and click
Next.
-
On the Which type of installation do you want page, click Custom (advanced).
-
On the Where do you want to install Windows page, create a 30 GB NTFS partition and click
Next to install Windows Server 2008.
-
Observe the installation is in progress and the machine does an auto restart.
-
Server prompts you to change the user's password. Click OK and change the password to p@ssw0rd.
-
Server prompts that the password has been changed. Click OK
-
Install Service Pack 2 Windows 6.0KB948465–X64.
-
In the Install Windows Server Service Pack wizard, on the Welcome to windows server service pack2 page, clickNext
-
Check I accept the licence terms check box and click Next.
-
Click Install
-
After the machine has restarted, press Ctrl+Alt+Del and log on as Administrator and click
Close button to close the wizard.
-
Choose Start→Control Panel, and in the Control Panel, double-click
Network and Sharing Center
-
In the Network and Sharing window, click Manage network connections.
-
Right-click Local Area Connection and choose Properties.
-
In the Local Area Connect Properties dialog box, in the This Connect uses the following items section, select
Internet Protocol Version 4 (TCP/IPv4) and click Properties.
-
In the Internet Protocol Version 4 (TCP/IPv4) Properties dialog box, on the
General tab, select the Use the following IP address option and enter the details given.
- IP Address: 192.168.40.200
- Subnet mask: 255.255.255.0
- Default gateway: 192.168.40.1
- Preferred DNS server: 192.168.40.200
-
Click OK and click Close.
-
Choose Start→Run.
-
On the Run wizard, in the Open text box, type dcpromo and click
OK.
-
In the Active Directory Domain Services Installation Wizard, click Next.
- On the Operating System Compatibility page, click Next.
- On the Choose a Deployment Configuration page, select Create a new domain in a new forest and click
Next.
- On the Name the Forest Root Domain page, in the FQDN of the Forest root domain text box, click and type
company.internal.com and click Next.
- On the Set Forest Functional Level page, from the Forest Functional Level drop-down list, select
Windows Server 2008 and click Next.
- On the Additional Domain Controller Options page, verify that DNS server check box is checked and click
Next.
- In the Active Directory Domain Services Installation Wizard, click
Yes.
- In the Active Directory Domain Services Installation Wizard, on the
Location for Database LOG files and SYSVOL page, click Next.
- In the Directory Services Restore Mode Administrator password, type
p@ssw0rd
- In the Confirm Password text box, click, type p@ssw0rd and then click
Next.
- On the Summary page, click Next.
- In the Active Directory Domain Services Installation wizard message box check Reboot on completion check box.
-
Press Ctrl+Alt+Delete and log on as Administrator.
-
Prerequisite services for installing the Microsoft Exchange 2010 server.
- Choose Start→Administrator Tools→Server Manager to launch Server Manager.
- Click Role and select Add Roles.
- In the Add Roles wizard, on the Before You Begin page, click
Next.
- On the Select Server Roles page, select Application server, and in the
Add Roles wizard message box, click the Add Required Features button.
- Select Web Server (IIS) role and click Next.
- On the Application Server page, click Next.
- On the Select Role Services page, select TCP Port Sharing, and in the
Add Role wizard message box, click the Add Required features button.
- Select HTTP Activation, and in the Add Roles Wizard dialog box, click the
Add Required Role Services button.
- Select Message Queuing Activation, and in the Add Roles Wizard
dialog box, click the Add Required features button and click Next.
- On the Web Server IIS page, click Next.
- On the Select Role Services page, under Security section, select
Basic Authentication, Windows Authentication, Digest Authentication, and in the
Performance section, verify that the Static Content Compression and
Dynamic Content Compression check boxes are checked.
- Select IIS 6 Management Compatibility option and verify that .NET Extensibility check box is checked and click
Next.
- Click Install.
- In the Installation Result page, observe the configuration of the application server and web server. Click Close.
- In the Server Manager window, select Features and then select
Add Features.
- In the Select Features wizard, check the RPC over HTTP Proxy check box, and in the
Add Features Wizard dialog box, click the Add Required Role Services
button and click Next.
- On the Web Server (IIS) page, click Next twice.
- Click Install.
- On the Installation Results page, click Close.
-
Prerequisite software for installing the Microsoft Exchange 2010 server.
- Install Microsoft .NET Framework 3.5 SP1.
- Install Windows Power Shell v2.0. KB-968930x64.
- Install 2007 Office System Converter: Microsoft Filter Pack.
-
Install Microsoft Exchange Server 2010.
- Insert the Microsoft Exchange Server 2010 CD-ROM.
- Choose Start, and in the Open dialog box, type cmd
- Open a command prompt and navigate to the root of the Exchange Server 2010 CD.
- Type Setup.com/PrepareLegacyExchangePermissions and press return.
- Type Setup.com/PrepareSchema and press return.
- Type Setup and press return.
- In the Exchange Server 2010 Setup window, select the Step 3: Choose Exchange
language option.
- Click Install only languages from the DVD.
- Click in Step 4 Install Microsoft Exchange.
- In the Exchange Server 2010 Setup Introduction page, click Next.
- Accept the license agreement and click Next.
- On the Error Reporting page, click Next.
- In the Installation type page, click Next.
- On the Exchange Organization page, type My First Organization and click
Next.
- On the Client Settings page, select No and then click Next.
- On the Configure Client Access server external domain page, click Next.
- On the Customer Experience Improvement Program page, click Next.
- The Readiness Checks page verifies the requirements for the Exchange Server to be installed. After it is verified, click
Install.
- If prompted, install any necessary updates.
- After the installation, click Finish.
- In the Exchange Management console, expand Microsoft Exchange On-Premises and click
Toolbox to launch the Best Practices Analyzer tool. Correct any issue that the tool finds.
- Click Get Critical Update For Microsoft Exchange to install further updates for the Exchange Server.
- Restart the computer.
-
Press Ctrl+Alt+Delete and log on as Administrator.
-
Create a domain user account for each student in the class. (This course was developed using a first name of
student, a last name of ##, user logon names of student##, and a password of
password. For instance: the instructor was student00, the first student was student01, and so on.)
- Choose Start→All Programs→Microsoft Exchange Server 2010→Exchange Management Console. .
- Expand Microsoft Exchange On-Premises and click the plus sign next to
Recipient Configuration to expand it.
- Click the Mailbox icon, right-click and choose New Mailbox.
- If necessary, in the New Mailbox window, on the Introduction page, select the
User Mailbox option and click Next.
- If necessary, on the User Type page, select the New User option and click Next.
- On the User Information page, type the first name as student
- Type the last name as ##
- Type the user logon name as student## (with no spaces).
- Enter and confirm a password of password and click Next.
- In the Alias text box, type the user name as student## (with no spaces).
- Check the Specify the mailbox database rather than using the database automatically selected check box.
- Click Browse, and in the dialog box, view the database selected and click
OK.
- Click Next.
- On the Archive Settings page, click Next.
- On the New Mailbox page, verify the configuration summary and click
New.
- On the Completion page, click Finish.
- Repeat steps (c) through (p) until all student domain user accounts are created.
-
Create the Conference Room A resource.
- Open the Exchange Management console.
- Expand Recipient Configuration.
- Right-click the Mailbox icon and select New Mailbox.
- In the New Mailbox window, on the Introduction page, select Room Mailbox and click
Next.
- On the User Type page, verify that New User is selected and click
Next.
- On the User Information page, enter the information mentioned below and click
Next.
- First Name: Conference
- Last Name: Room A
- User Logon Name: ConferenceRoomA
- In the Mailbox Settings page, in the Alias text box, type Conference Room A
- Check Specify the mailbox database rather than using a database automatically selected and click
Browse.
- View the database selected and click OK.
- Click Next.
- In the Archive Settings page, click Next.
- On the New Mailbox page, on the Completion page, click New and then on the
Completion page, click Finish.
- Similarly, create Conference Rooms B and C.
-
Grant administrator rights to Student00.
- Choose Start→All Programs→Administrator Tools→Active Directory Users and Computers.
- Expand company.internal.com
- In the Active Directory Users And Computers window, select Users, and in the right pane, right-click
student00 and choose Properties.
- In the student00 Properties dialog box, select the Member of Tab
and click Add.
- In the Select Groups window, click Advanced and then click Find Now.
- In the Search Results list, select Enterprise Admin.
- Click OK twice.
- Click Apply and click OK.
- Close Active Directory Users And Computers.
-
Install Microsoft Office for Mac 2011 on the Macintosh HD.
- Log in as the administrator user.
- Run the software installation CD.
- Double-click the Microsoft Office 2011 setup icon on your desktop.
- In the Microsoft Office 2011 dialog box, double-click Office Installer.
- In the Install Microsoft Office for Mac 2011 dialog box, click Continue.
- Go through the software licence agreement and click Continue.
- In the message box that is displayed, click Agree to accept the software licence agreement terms.
- Click Install to perform a standard installation on the Macintosh HD.
- Enter the administrator user name and password and click OK.
- Observe the installation progress and when you receive a message for a successful completion of the installation, click
Close.
- In the displayed window, select Enter your product key.
- Select the desired language to view the software licence agreement and click
Continue.
- In the message box that is displayed, click Agree.
- Enter your product key to activate online and click Activate.
- Observe the message displaying that the Office for Mac is activated and click
Continue.
- Click Done.
-
Configure the network connection
- From the Apple menu, choose System Preferences.
- In the System Preferences window, in the Internet & Wireless section, click
Network.
- In the Network window, from the Configure IPv4 pop-up menu, choose
Manually.
- In the IP address text box, type 192.168.40.201
- In the Subnet Mask text box, type 255.255.0.0
- In the Default Gateway text box, type 192.168.40.200
- Click Advanced and select the DNS tab.
- In the Network window, below the DNS Servers list box, click the plus symbol.
- In the DNS Servers list box, click and type 192.168.40.200 and then click
OK.
- In the Network window, click Apply.
- Close the Network window.
-
Check the network connectivity.
- From the Go menu, choose Utilities.
- In the Utilities window, double-click Terminal.
- In the Terminal– bash– 80x24 window, type ping 192.168.40.201
- Press return to observe the ping status.
-
Establish connection with the server.
- From the Apple menu, choose System Preferences.
- In the System Preferences window, in the System section, click Accounts.
- In the Accounts window, in the Accounts list box, select Login Options and click
Join.
- In the displayed dialog box, click Open Directory Utility.
- In the displayed dialog box, enter the administrator user name and password and click
OK.
- In the Directory Utility window, click the pencil symbol.
- In the displayed dialog box, in the Active Directory Domain text box, type
company.internal.com
- In the Computer ID text box, type a desired ID for the computer and click
Bind.
- In the Network Administrator Required dialog box, in the Username text box, type
administrator and in the Password text box, type p@ssw0rd
- Click OK, and in the displayed dialog box, click OK.
- Close the Directory Utility window.
-
Add printers.
- Choose Start→Printers and Faxes.
- In the Printer Tasks section, click Add A Printer and follow the prompts.
If you do not have a physical printer installed, right-click the printer and choose Pause Printing to prevent any print error message.
-
Configure the computer to the member of the domain.
- Right-click My Computer and choose Properties.
- In the System Properties dialog box, select the Computer Name tab and click
Change.
- In the Computer Name Changes dialog box, click More.
- In the DNS Suffix and Net BIOS Computer Name dialog box, type company.internal.com and click
OK.
- In the Computer Name Changes dialog box, in the Member of section, select
Domain and type company.internal.com and click OK.
- In the Computer Name Changes dialog box, enter the user name as Administrator and the password as
p@ssw0rd and click OK.
- In the Computer Name Changes message box, click OK.
- Click OK to restart the computer.
- In the System Properties dialog box, click OK.
- In the System Settings Change message box, click Yes.
- Similarly, configure the other computers to the domain.
- In the User Domain field, type Company
-
Log on to the Company domain as student## with a password of password
-
Perform a complete installation of Microsoft® Office Professional Plus 2010.
-
Log on to the Company domain as student## with a password of password
-
Configure Microsoft® Office Outlook® 2011.
- From the taskbar, choose Start→All Programs->Microsoft Office->Microsoft Outlook 2011.
- In the Microsoft Outlook 2011 Startup wizard, click Next.
- On the E-mail Accounts page, verify that Yes is selected and click
Next.
- On the Auto Account Setup page, click Next.
- In the Security Alert message box click Yes.
- On the Configuration page, click Next and click Finish.
- In the User Name dialog box, click OK to accept the default user name and initials.
- In the Microsoft Office 2011 Activation Wizard dialog box, click Next to activate the Office 2011 application.
- When the activation of Microsoft Office 2011 is complete, click Close to close the
Microsoft Office 2011 Activation Wizard dialog box.
- In the Security Alert message box, click Yes twice.
-
Open Internet Explorer and browse to http://www.microsoft.com.
-
In the list of Microsoft sites, click Downloads and Trials.
-
In the Downloads and Trials window, click Download Center.
-
In the Microsoft Download Center page, in the Product Families section, click
Windows.
-
In the list of downloads, locate the WindowsSearch-KB940157-XP-x86-enu.zip link and click it.
-
In the WindowsSearch-KB940157 page, click Continue.
-
In the Install The Genuine Windows Validation Component - Microsoft Internet Explorer window, in the
Alternate Validate Method section, click Genuine Windows Validation, Alternate Method.
-
In the Genuine Windows Validation Continued - Microsoft Internet Explorer window, in the
Run The Validation Tool section, click Continue.
-
In the File Download - Security Warning dialog box, click Run. Wait for the download to complete.
-
In the Internet Explorer - Security Warning dialog box, click Run to run the downloaded component.
-
In the Windows Genuine Advantage dialog box, click Copy To Clipboard
to copy the validation code.
-
In the Genuine Windows Validation Continued - Microsoft Internet Explorer window, in the
Enter Your Validation Code section, click the text box and paste the validation code.
-
Click Validate.
-
In the Internet Explorer dialog box, click Yes.
-
In the Microsoft Download Center, click Download to download the Windows Desktop Search tool.
-
In the File Download - Security Warning dialog box, click Run. Wait for the download to complete.
-
In the Internet Explorer - Security Warning dialog box, click Run to install the downloaded Windows Desktop Search tool.
-
In the Windows Search Setup dialog box, click Next.
-
On the Licence Agreement page, select I Agree and click Next.
-
On the Congratulations page, click Finish to complete the installation.
-
Open Internet Explorer and browse to http://www.microsoft.com/windows/internet-explorer/worldwide-sites.com.
-
Scroll down and, in the Internet Explorer 8 For Windows XP Service Pack 2 (SP2) section, click
Download.
-
Select a country and click the operating system type.
-
In the File Download-Security warning dialog box, click Run.
-
In the Install Windows Internet Explorer 8 wizard, select I do not want to participate right now and click
Next.
-
Click I accept.
-
In the Get the latest updates page, click Next.
-
In the Internet Explorer installation is complete page, click Restart now (recommended).
-
Once the installation is complete, log in as the user.